Temperature

• Adorni, N., Ceppatelli, L., Grassi, A., Palama, A., and Rosselli, P., 1980, Construction of a probe for measuring temperature and pressure in deep wells: Geothermics, v. 9, no. 3-4, p. 251-259.



• Anand, J., Somerton, W.H., and Gomaa, E., 1972, Prediction of thermal properties of formations from other known properties: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 4171, 12 p.



• Basham, R.B., and Macune, C.W., 1952, The Delta-log, a differential temperature surveying method: American Institute of Mining, Metallurgical, and Petroleum Engineers Transactions, v. 195, p. 123-128.



• Beck, A.E., 1976, The use of thermal resistivity logs in stratigraphic correlation: Geophysics, v. 41, no. 21, p. 300-309.



• Beck, A.E., Anglin, F.M., and Sass, J.H., 1971, Analysis of heat flow data-- In situ thermal conductivity measurements: Canadian Journal of Earth Sciences, v. 8, no. 1, p. 2-19.



• Beck, A.E., and Judge, A.S., 1969, Analysis of heat flow data--Detailed observations in a single borehole: Geophysical Journal of the Royal Astronomical Society, v. 18, no. 2, p. 145-158.



• Bennett, Ken, 1965, Operating instructions--delta temperature tool: Fort Worth, Tex., Gearhart-Owen, Inc., 7 p.



• Bird, J.E., and Frost, Noel, 1965, Formation productivity evaluation from temperature logs: Society of Professional Well Log Analysts Annual Logging Symposium, 6th, Dallas, Tex., 1965, Transactions, p. H1-H18.



• Boonen, Paul, and Flowers, Steve, 1996, Hostile environment full-wave sonic logging permits fracture evaluation in high-temperature slimhole wells: Society of Professional Well Log Analysts Annual Logging Symposium, 37th, New Orleans, La., 1996, Transactions, p. FF1-FF10.



• Carlson, N.R., and Barnette, J.C., 1986, The significance of the temperature log in multiphase flows: Society of Professional Well Log Analysts Annual Logging Symposium, Dallas, Tex., 1986, Transactions, p. R1-R11.



• Cocanower, R.D., Morris, B.P., and Dillingham, Mat, 1968, Computerized temperature decay an asset to temperature logging: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 2255, 10 p.



• Conaway, J.G., 1977, Deconvolution of temperature gradient logs: Geophysics, v. 42, no. 4, p. 823-837.



• _____1987, Temperature logging as an aid to understanding groundwater flow in boreholes: Los Alamos National Laboratory LA-UR--87-3355, 9 p.



• Conaway, J. G., and Beck, A. E., 1977, Fine-scale correlation between temperature gradient logs and lithology: Geophysics, v. 42, no. 7, p. 1401-1410.



• Cooke, C.E., Jr., 1978, Radial differential temperature (4RDT) logging--A new tool for detecting and treating flow behind casing: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 7558, 8 p.



• Cooke, C.E., Jr., and Meyer, A.J., 1979, Application of radial differential temperature (RDT) logging to detect and treat flow behind casing: Society of Professional Well Log Analysts Annual Logging Symposium, 20th, Tulsa, Okla., 1979, Transactions, p. UU1-UU7.



• Costain, J.K., 1970, Probe response and continuous temperature measurements: Journal of Geophysical Research, v. 75, no. 20, p. 3969-3975.



• Curtis, M.R., and Witterholt, E.J., 1973, Use of the temperature log for determining flowrates in producing wells: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 4637, 12 p.



• Dowdle, W.L., and Cobb, W.M., 1974, Estimation of static formation temperature from well logs: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 5036, 8 p.



• Dziallas, J.W., and Hooper, L.J., 1968, Temperature distribution around a cylindrical probe in water: Water Power, v. 20, no. 7, p. 277-283.



• Elashahab, B.M., Jing, X.D., and Archer, J.S., 1995, The effects of temperature and wettability on resistivity index measurements on rock samples: Society of Professional Well Log Analysts Annual Logging Symposium, 36th, Paris, France, 1995, Transactions, p. AAA1-AAA10.



• Eldoy, Arild, Rafdal, Jan, and Dodson, Tim, 1995, Formation pressure determination in high pressure high temperature wells in the central graben area of the North Sea: Society of Professional Well Log Analysts Annual Logging Symposium, 36th, Paris, France, 1995, Transactions, p. EEE1-EEE12.



• Fertl, W.H., 1978, How subsurface temperature affects formation evaluation: Oil and Gas Journal, v. 76, no. 30, p. 54-62.



• Fertl, W.H., and Wichmann, P.A., 1977, How to determine static BHT from well log data: World Oil, v. 184, no. 1, p. 105-106.



• Gable, Robert, Morin, R.H., Becker, Keir, and Pezard, Phillipe, 1995, Heat flow in the upper part of the oceanic crust--synthesis of in-situ temperature measurements in hole 504B: Proceedings of the Ocean Drilling Program, Scientific Results, v. 137/140, p. 321-324.



• Gearhart Owen International, Inc., 1971, An introduction to single element differential temperature logging: Fort Worth, Tex., 30 p.



• Guyod, Hubert, 1946, Temperature well-logging: Well Instrument Developing Company, Houston, TX, 47 p.



• Hallock, William, 1897, Subterranean temperatures at Wheeling, W. Va. and Pittsburgh, Pa.: Columbia University, School of Mines Quarterly, v. 18, p. 148-153.



• Hoang, V.T., and Somerton, W.H., 1981, Effect of variable thermal conductivity of the formations on the fluid temperature distribution in the well bore: Society of Professional Well Log Analysts Annual Logging Symposium, 22d, Mexico City, Mexico, 1981, Transactions, p. L1-L24.



• Howell, E.P., Seth, M.S., and Perkins, T.K., 1972, Temperature calculations for wells which are completed through permafrost: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 3969, 9 p.



• Hutchins, J.S., and Kading, H.W., 1969, How to interpret temperature surveys- 2: Oil and Gas Journal, v. 67, n. 34, p. 96-103.



• Johns, Earl, 1967, Tracing fluid movements with a new temperature technique: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 1750, 8 p.



• Joslyn, C.D., and Chilton, L.F., 1970, Analysis of well problems through the use of differential temperature logs: American Petroleum Institute, Spring Meeting of the Rocky Mountain Division, Denver, CO, paper no. 875-24-H, 13 p.



• Kading, H.W., 1975, Horizontal-spinner, a new production logging technique: Southwestern Petroleum Short Course Association, Lubbock, TX, 5 p.



• Kading, H.W., and Hutchins, J.S., 1969, Temperature surveys; the art of interpretation: American Petroleum Institute, Spring Meeting of the Southwestern district, Lubbock, Tex., paper no. 906-14-N, 39 p.



• Keller, H.H., Couch, E.J., and Baldwin, W.F., 1974, Quantitative interpretation of temperature logs: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 5091, 6 p.



• Kohout, F.A., 1967, Ground-water flow and the geothermal regime of the Floridian plateau: Gulf Coast Association of Geological Societies, v. 17, Transactions, p. 339-354.



• Krige, L.J., 1939, Borehole temperatures in the Transvaal and Orange Free State: Proceedings of the Royal Society of London, v. 173, p. 450-473.



• Measurements & Data, 1969, Temperature measurement: Measurements & Data Corp., M&D home study course 16, July-August, p. 49-79.



• Maubeuge, Frederic, Didek, M.P., Beardsell, M.B., Arquis, Eric, and Caltagirone, J.P., 1994, Temperature model for flow in porous media and wellbore: Society of Professional Well Log Analysts Annual Logging Symposium, 35th, Tulsa, Okla., 1994, Transactions, p. N1-N16.



• Murphy H.G., 1977, Fluid injection profiles-a modern analysis of wellbore temperature surveys: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 6783, 6 p.



• Nowak, T.J., 1953, The estimation of water injection profiles from temp- erature surveys: Petroleum Transactions, American Institute of Mining, Metallurgical, and Petroleum Engineering, v. 198, p. 203-212.



• Parker, J.D., 1971, Basics of thermal conductivity, specific heat: Oil, Gas and Petrochemistry Equipment, v. 17, no. 11, p. 4-5.



• Peacock, D.R., 1965, Temperature logging: Society of Professional Well Log Analysts Annual Logging Symposium, 6th, Dallas, Tex., 1965, Transactions, p. F1-F18.



• Pennebaker, E.S., Jr., and Woody, R.T., 1977, The temperature-sound log and borehole channel scans for problem wells: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 6782, 12 p.



• Quintero, L.F., Manrique, E.J., Linares, J.A., Ramones, M.A., and Natera, J.A., 1993, Permeability measurement through temperature logging: Society of Professional Well Log Analysts Annual Logging Symposium, 34th, Calgary, Alberta, Canada, 1993, Transactions, p. C1-C10.



• Richter, A.P., Jr., and Peelman, H.E., 1985, Temperature stabilization for a radiation detector in a well logging tool: United States Patent no. 4517459, 3 p.



• Sammel, E.A., 1968, Convective flow and its effect on temperature logging in small-diameter wells: Geophysics, v. 33, no. 6, p. 1004-1012.



• Schneider, Robert, 1962, An application of thermometry to the study of ground water: U.S. Geological Survey Water-Supply Paper 1544-B, p. B1-B16.



• _____1972, Distortion of the geothermal field in aquifers by pumping, in Geological Survey Research 1972: U.S. Geological Survey Professional Paper 800-C, p. C267-C270.



• Silva, A.J., and Morin, R.H., 1986, The sensitivity of sediment physical properties to changes in temperature, pressure, and porosity, in Burrus, J., ed., Thermal Modeling in Sedimentary Basins--Proceedings of the 1st IFP Exploration Research Conference, June 3-7, 1985: Paris, France, Institut Francais du Petrole, p. 289-309.



• Simmons, Gene, 1966, Temperature logging and heat flow: Society of Professional Well Log Analysts Annual Logging Symposium, 7th, Tulsa, Okla., 1966, Transactions, p. I1-I9.



• Smith, M.P., 1989, Temperature effects on dual-spaced thermal neutron logging tools: Society of Professional Well Log Analysts Logging Symposium, 30th, Denver, Colo., 1989, Transactions, p. QQ1-QQ16.



• Smith, R.C., and Steffensen, R.J., 1970, Computer study of factors affecting temperature profiles in water injection wells: Journal of Petroleum Technology, v. 22, no. 11, p. 1447-1458.



• _____1973, Improved interpretation guidelines for temperature profiles in water injection wells: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 4649, 12 p.



• _____1975, Interpretation of temperature profiles in water-injection wells: Journal of Petroleum Technology, v. 27, no. 6, p. 777-784.



• Sorey, M.L., 1971, Measurement of vertical groundwater velocity from temperature profiles in wells: Water Resources Research, v. 7, no. 4, p. 963-970.



• Steffensen, R.J., and Smith, R.C., 1973, The importance of Joule-Thomson heating (or cooling) in temperature log interpretation: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 4636, 14 p.



• Stevens, H.H., Jr., Ficke, J.F., and Smoot, G.F., 1975, Water temperature-- Influential factors, field measurement and data presentation: U.S. Geological Survey Techniques of Water Resources Investigations, book 1, chap. D1, 65 p.



• Tait, D.B., 1972, Geohydrology of the Piceance Creek basin, Colorado: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 4046, 7 p.



• Winslow, J.D., 1962, Effect of stream infiltration on ground-water temperatures near Schenectady, New York, in Geological Survey Research 1962: U.S. Geological Survey Professional Paper 450-C, p. C125-C128.



• Witterholt, E.J., and Tixier, M.P., 1972, Temperature logging in injection wells: Society of Petroleum Engineers of the American Institute of Mining, Metallurgical, and Petroleum Engineers Paper SPE 4022, 12 p.