RE: Question

[BROUARD Christophe 202107 <BROUARDCh@xxxxxxxxxxxxxxxxx>]

Thank you for your response, it's ok

can we do the same thing with version 2.7 interactive

Christophe

-----Message d'origine-----
De : David L Parkhurst [mailto:dlpark@xxxxxxxx]
Envoyé : jeudi 20 mars 2003 21:53
À : BROUARD Christophe 202107
Objet : Re: Question



> in ms-dos, I write this program

> c:
> cd program files
> cd phreeqc
> phreeqc name.inp name.out phreeqc.dat sortie1.res

> but the program don't start

> How to start automatically and at the end of the simulation, how quit
phreeqc



You need to install the batch version of phreeqc 2.7 (available at the web
address given below). If you have done that, you can write a batch file
that contains the following command that will run phreeqc as a batch
program.

phreeqc input output "c:\Program Files\Usgs\phreeqc2.7\phreeqc.dat" screen

If you want to call phreeqc more than once in the .bat file, then you must
use the "call" statement:

call phreeqc input output "c:\Program Files\Usgs\phreeqc2.7\phreeqc.dat"
screen
call phreeqc input1 output1 "c:\Program Files\Usgs\phreeqc2.7\phreeqc.dat"
screen

David

David Parkhurst (dlpark@xxxxxxxx)
U.S. Geological Survey
Box 25046, MS 413
Denver Federal Center
Denver, CO 80225

Project web page: https://wwwbrr.cr.usgs.gov/projects/GWC_coupled