Re: Bug for llnl.dat database?

[Colin Walker <colin.walker@xxxxxxxxxxxxx>]

Thanks David,

You were right and I got the memory up to 20Mb and now no problems 
whatsoever. Thank you very much for the prompt reply and for an excellent 
product.

Colin Walker

--On Monday, January 14, 2002 9:49 am -0700 David L Parkhurst 
<dlpark@xxxxxxxx> wrote:

> The error message  indicates that the program ran out of memory. Unless
> you have only a few megabytes of memory, this should not have happened.
> I'll have to check with Brian Marshall (he compiled the Mac version) to
> see if he has any ideas, but the examples worked on his machine. However,
> example 1 is normally run with the phreeqc.dat database, so llnl.dat may
> not have been tested.
>
> A couple things you could do (1) run  example 1 with the phreeqc.dat
> database, and (2) attach the ex1.out files for both the phreeqc.dat and
> llnl.dat runs to an email.
>
> Thanks for bringing this to our attention, hopefully we can find the
> problem.
>
> David
>
> David Parkhurst (dlpark@xxxxxxxx)
> U.S. Geological Survey
> Box 25046, MS 413
> Denver Federal Center
> Denver, CO 80225

>                     Michele Y
>                      Crouse               To:     David L
>                     Parkhurst/WRD/USGS/DOI@xxxx                 cc:
>                                          gs-w_h2osoft@xxxxxxxx
>                                           01/14/02             Subject:
>                     Bug for llnl.dat database?                     09:14
>                     AM

>

> ----- Forwarded by Michele Y Crouse/WRD/USGS/DOI on 01/14/02 11:13 a.m.
> -----

>                     Colin Walker
>                      <colin.walker@xxxx        To:     h2osoft@xxxxxxxx
>                      tol.ac.uk>                cc:
In-Reply-To: <a05100303b868c2f583f5@[136.177.25.111]>
>                      Subject:     Bug for llnl.dat database?
>                                                01/14/02 04:38
>                      a.m.

>

> To whom it may concern,
>
> I have recently downloaded Phreeqc 2.5 for the macintosh and can't get the
> llnl.dat database to work with it. I get the following error message as
> output
>
>
>
> SIOUX state: application has terminated
> ________________________________________
>
> Input file: ex1
>
> Output file: ex1.out
>
> Database file: llnl.dat
>
>
> Initializing...
>
> ERROR: NULL pointer returned from malloc or realloc.
> ERROR: Program terminating.
> Stopping.
>
>
>
> Is there a problem with the database or am I missing something obvious?
>
> Yours faithfully,
>
> Colin Walker
> Univeristy of Bristol
> UK