[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


> If I correctly understood it is
possible to introduce in PHREEQC input file many surface reactions of
kinetically reacting minerals. I elaborated the following  input file but I
have some problems to react all minerals. For instance, only the first one
(dolomite in the file) is reacting.

You are performing a "batch" reaction calculation, where you want the
kinetic reactions to interact with a single solution. It is necessary to
include all of the kinetic reactions in a single KINETICS data block. If
you move on to transport modeling, you can define different sets of kinetic
reactions for each cell, but it is still necessary to include all of the
kinetic reactions for a single cell in one KINETICS data block.


David Parkhurst (dlpark@xxxxxxxx)
U.S. Geological Survey
Box 25046, MS 413
Denver Federal Center
Denver, CO 80225

Project web page: https://wwwbrr.cr.usgs.gov/projects/GWC_coupled

Project Home Page
Complete Water Resources Division Software
USGS Home Page
Water Resources Division Home Page
NRP Home Page
Help Page
USGS Privacy Statement       

Please note that some U.S. Geological Survey (USGS) information accessed through this page may be preliminary in nature and presented prior to final review and approval by the Director of the USGS. This information is provided with the understanding that it is not guaranteed to be correct or complete and conclusions drawn from such information are the sole responsibility of the user.

Any use of trade, product, or firm names in this publication is for descriptive purposes only and does not imply endorsement by the U.S. Government. 

The URL of this page is: https://wwwbrr.cr.usgs.gov/projects/GWC_coupled/phreeqc/mail/msg00542.html
Last modified: $Date: 2005-09-13 21:04:21 -0600 (Tue, 13 Sep 2005) $
Visitor number 2508 since Jan 22, 1998.