After the simulation setup is completed, you can invoke the post processor to run the model by clicking the "Show" menu and selecting "Postprocessor". The postprocessor window is displayed.
If you did not enter all the necessary data to set up the simulation, the postprocessor window will not show up. Instead, an error message is displayed. You should enter the missing data and then start the postprocessor.
When the postprocessor window is displayed, you cannot edit or modify the simulation setup in the preprocessor (for example, change a boundary condition). To edit or modify the simulation setup, you need to first close the preprocessor by clicking the "Action" menu and selecting "Done".
When the postprocessor window first appears, it displays the initial pressure head. The postprocessor allows you to:
See also:
Return to: Contents