Help for VS2DHI - Version 1.1


How to Set Up a simulation

  1. Create a new document file
  2. Select model Options
  3. Specify textural classes
  4. Specify evapotranspiration cycle
  5. Set up the drawing area
  6. Load site map (optional)
  7. Draw the domain
  8. Draw the textural map
  9. Specify initial hydraulic condition
  10. Specify initial temperature
  11. Specify recharge periods
  12. Specify boundary conditions
  13. Specify observation points (optional)
  14. Lay out the grid
  15. Evaluate the discretization

How To Run a Simulation

File Management

The Postprocessor in Standalone Mode


Exporting the drawing as a bitmap